Stations

The stations'graphical complexity is variable. There are two pictures station, eight pictures station or sixteen pictures station and four pictures stations made for way extremities (like planes tarmacs). Plus stations'graphics depend of the way type which the station is made for. These are some basic graphics for some waytypes which you can draw on.

Graphics

Parameter Dims

LThe parameter “dims” which is in the .dat defines the number of pictures the station has. It's of the pattern dims=x,y,z

x et y defines the size of the station, they're always equal to 1 because a station can't be more of one tile big. z defines the number of pictures of the station, it can be 2, 4, 8 or 16.

dims	directions	possible sides for the platform	possible configurations of one station	backimage and frontimage	total number of pictures
1,1,2	2 (North-South et East-West)	*1 ( on each side)	*1 (simple station)	*2	4
1,1,4	4 (North, South, East, West extremities)	*1 ( on each side)	*1 (extremity)	*2	8
1,1,8	2 (North-South et East-West)	*1 ( on each side)	*4 (single station, extremity1, extremity2, central part)	*2	16
1,1,16	2 (North-South et East-West)	*2 (behind and before the way)	*4 (single station, extremity1, extremity2, central part)	2 (frequently 1)	32 (frequently 16)

1,1,4 :1,1,8 :1,1,16 :This is the graphican part of the .dat file

icon= > image.x.y
cursor=image.x.y

backimage[0][0][0][0][0]=image.x.y
backimage[1][0][0][0][0]=image.x.y
backimage[2][0][0][0][0]=image.x.y
backimage[3][0][0][0][0]=image.x.y
backimage[4][0][0][0][0]=image.x.y
backimage[5][0][0][0][0]=image.x.y
backimage[6][0][0][0][0]=image.x.y
backimage[7][0][0][0][0]=image.x.y
backimage[8][0][0][0][0]=image.x.y
backimage[9][0][0][0][0]=image.x.y
backimage[10][0][0][0][0]=image.x.y
backimage[11][0][0][0][0]=image.x.y
backimage[12][0][0][0][0]=image.x.y
backimage[13][0][0][0][0]=image.x.y
backimage[14][0][0][0][0]=image.x.y
backimage[15][0][0][0][0]=image.x.y

frontimage[0][0][0][0][0]=image.x.y
frontimage[1][0][0][0][0]=image.x.y
frontimage[2][0][0][0][0]=image.x.y
frontimage[3][0][0][0][0]=image.x.y
frontimage[4][0][0][0][0]=image.x.y
frontimage[5][0][0][0][0]=image.x.y
frontimage[6][0][0][0][0]=image.x.y
frontimage[7][0][0][0][0]=image.x.y
frontimage[8][0][0][0][0]=image.x.y
frontimage[9][0][0][0][0]=image.x.y
frontimage[10][0][0][0][0]=image.x.y
frontimage[11][0][0][0][0]=image.x.y
frontimage[12][0][0][0][0]=image.x.y
frontimage[13][0][0][0][0]=image.x.y
frontimage[14][0][0][0][0]=image.x.y
frontimage[15][0][0][0][0]=image.x.y

Backimages are displayed behind vehicles and frontimages are displayed before vehicles. The both will be displayed above the way. Here they are the necessary pictures for a 16 pictures station, you have to make pictures until image[1] if dims=1,1,2, image[3] if dims=1,1,4, image[7] if dims=1,1,8 and image[15] if dims=1,1,16. This is what stand for pictures for 1,1,2; 1,1,8 et 1,1,16

Particular case : 8 and 16

In the cases of the two last stations seen as examples before, these two stations use only sixteen pictures with the icon and the cursor for each one. The 16 pictures'station has a platform on each side, it uses backimages when the platform is behind the way and frontimages when the platform is before the way, the both simultaneously are rarely needed. But when two platforms are used together, one behind and one before the way, there's a 8 picture's station. The 8 pictures'station uses simultaneously backimage and frontimage of the 16 pictures'station. (see the downloadable sources at the bottom of this page to understand).

Trames

Voici les trames pour les stations les plus complexes à dessiner : rail/monorail/maglev et route/tram. Les stations fluviales sont faciles à faire à partir des stations de bus et les tarmacs d'aéroports n'ont pas de contrainte vu que la taille des avions est très variable, les ports eux occupent un tile complet et n'ont donc pas de contrainte spéciale non plus.

Rail/monorail/maglev

Voici une image toute récente avec des quais faits maison à partir de stations existantes variant selon les époques (on a moderne, ancien et entre les deux).

Voici les mêmes vides :

Voici les trames .dat liées :

Dims=1,1,8

icon= > image.0.8
cursor=image.1.8

backimage[0][0][0][0][0]=image.0.0
backimage[1][0][0][0][0]=image.0.1
backimage[2][0][0][0][0]=image.0.2
backimage[3][0][0][0][0]=image.0.3
backimage[4][0][0][0][0]=image.0.4
backimage[5][0][0][0][0]=image.0.5
backimage[6][0][0][0][0]=image.0.6
backimage[7][0][0][0][0]=image.0.7

frontimage[0][0][0][0][0]=image.1.0
frontimage[1][0][0][0][0]=image.1.1
frontimage[2][0][0][0][0]=image.1.2
frontimage[3][0][0][0][0]=image.1.3
frontimage[4][0][0][0][0]=image.1.4
frontimage[5][0][0][0][0]=image.1.5
frontimage[6][0][0][0][0]=image.1.6
frontimage[7][0][0][0][0]=image.1.7

Dims=1,1,16

icon= > image.0.8
cursor=image.1.8

backimage[0][0][0][0][0]=image.0.0
backimage[1][0][0][0][0]=image.0.1
backimage[2][0][0][0][0]=image.0.2
backimage[3][0][0][0][0]=image.0.3
backimage[4][0][0][0][0]=image.0.4
backimage[5][0][0][0][0]=image.0.5
backimage[6][0][0][0][0]=image.0.6
backimage[7][0][0][0][0]=image.0.7

frontimage[8][0][0][0][0]=image.1.0
frontimage[9][0][0][0][0]=image.1.1
frontimage[10][0][0][0][0]=image.1.2
frontimage[11][0][0][0][0]=image.1.3
frontimage[12][0][0][0][0]=image.1.4
frontimage[13][0][0][0][0]=image.1.5
frontimage[14][0][0][0][0]=image.1.6
frontimage[15][0][0][0][0]=image.1.7

Route/tram

Voici la trame .dat liée

Paramètres basiques

Paramètre	Description	Contenu	Exemple
obj	type d'objet	building
type	type de bâtiment	stop
waytype	type de voie	nom interne	track
name	nom	texte	SNFOS_trainstation_simple
intro_year	année de disponibilité	nombre	1990
intro_month	mois de disponibilité	nombre	1
retire_year	année de retraite	nombre	2080
retire_month	mois de retraite	nombre	1
copyright	nom du créateur	texte	Gauthier
NoInfo	non affichage d'une fenêtre d'info lors d'un clic sur l'objet	booléen	1
noconstruction	non affichage de l'image de construction	booléen	0
enables_pax	la station accepte les passagers	booléen	0
enables_post	la station accepte les messages	booléen	0
enables_ware	la station accepte les marchandises	booléen	1
level	nombre de passagers/messages/marchandises que la station accepte (*32 unités)	nombre	2

type

On utilise type=habour pour les ports et type=stop pour toutes les autres stations.

waytype

Types de voies possibles

Fichiers exemples

Vous trouverez à ce lien des fichiers sources des stations SNFOS.

Stations.rar

Revenir aux objets